Configuring Recording Settings - Honeywell HEN04101(X) User Manual

188 | Performance Series Network Video Recorder User Guide

Configuring Recording Settings

Click Record in the Schedule configuration interface to open the Record configuration
interface.
www.honeywell.com/security
Figure 5-52 Record Configuration Interface for Storage Settings
Table 5-22 Recording Configurations for Storage
Configuration
Channel
Status
Auto
Manual
Off
Description
View the channel number. The number displayed here is the
maximum number of channels for your NVR.
Select a status: Auto, Manual, or Off.
The system enables the automatic recording function, which
you have set in the Recording Schedule setup (such as
general, motion detection, and alarm settings). See
Configuring the General Settings on page
Detection Settings on page
page 179.
This is the highest priority setting.
Enable the corresponding channel to record, no matter the
period that was configured in the Recording setup.
Stop the corresponding channel from recording, no matter the
period that was configured in the Recording setup.
60, Configuring
174, and Configuring Alarms on