Bps - Honeywell HEN04101(X) User Manual

52 | Performance Series Network Video Recorder User Guide

BPS

Click BPS
www.honeywell.com/security
Figure 3-12 HDD Recording Time Information Interface
Table 3-7 HDD Recording Time Information
Parameter Function
SATA You can connect up to two HDDs, which are shown here.
When the connected HDD is working properly. you see o. When
there is no HDD, you see -.
SN View the size of the HDD drive that is connected to your NVR.
When the second HDD is the currently working HDD, you see *.
Type The type of the connected HDD.
Total Space The total capacity of the connected HDD.
Free Space The total free capacity of the connected HDD.
Status Indicates if the HDD is working correctly or not.
Bad Track Indicates that there is a bad track.
Page Up Click to view the previous page.
Page Down Click to view the next page.
View Recording Click to view the HDD recording information, such as the file start
Time time and file end time.
View HDD Type and Click to view the HDD properties such as status, type, total space,
Capacity free space, and S.M.A.R.T.
in the INFO tab to open the BPS interface.