Honeywell HEN04101(X) User Manual page 83

Table 3-19 WIFI Setting Functions/Control
Button/Control
Disconnect
Connection
Connection Status
When the NVR has successfully connected to the WIFI, the hotspot name, IP address, subnet
mask, default gateway are all visible.
Description
Click to disconnect from the hotspot.
Click to connect to the hotspot. The NVR needs to turn off the
current connection and then connect to a new hotspot, if you
have selected a new one. The WIFI Connection interface
appears.
WIFI Connection interface, no connection.
WIFI Connection interface, showing a connection.
Shows the connection status.
After successfully connecting, the WIFI icon appears in the top
right corner of the preview interface.
When the hotspot Verification Type is WEP, the NVR displays
AUTO, because the device can not detect its encryption type.
The NVR does not support verification of types WPA and
WPA2. The display might become abnormal for the
verification type and the encryption type.
NVR Configurations | 83
800-18160 - B - 07/2014