Configuring The Mobile Setup For 3G - Honeywell HEN04101(X) User Manual

164 | Performance Series Network Video Recorder User Guide

Configuring the Mobile Setup for 3G

Click the Mobile Setup tab in the Network Configuration interface to open the Mobile Setup
configuration interface.
www.honeywell.com/security
Figure 5-30 CDMA/GPRS Configuration Interface
Table 5-13 CDMA/GPRS Configurations
Configuration
WLAN Type
APN & Dial No.
AUTH
Pulse Interval
Note If the Pulse Interval is 0, then the system does not end the 3G connection after you
close the extra stream monitor.
Note The Pulse Interval here is for the extra stream only. This field is inactive if you are
using a main stream monitor.
Description
Select a 3G network type to distinguish this 3G module from
different ISPs. Choose from WCDMA, CDMA1x, for example.
APN and the Dial No. are important PPPoE parameters. The
APN (Access Point Name) and the Dial No. are automatically
received by the NVR after connecting to a 3G module.
Authorization. Choose from PAP, CHAP, or NO_AUTH.
Configure a time for ending the 3G connection after you close
the extra stream monitor. For example, if you select 60 here,
the NVR ends the 3G connection 60 seconds after you close
the extra stream monitor.