Configuring The Encoding Settings - Honeywell HEN04101(X) User Manual

Table 3-8 General Settings
Setting
Mouse properties
Startup wizard
Auto logout
Navigation bar
IPC Time Sync

Configuring the Encoding Settings

Click the Encode icon
Description
Click MouseSet to open the mouse setup interface.
You can configure the mouse double-click speed. Click Default to
restore the mouse settings to the default setup.
If you check to enable the Startup wizard, then the next time the
NVR restarts, it will open to the Startup wizard. If you do not check
to enable the Startup wizard, the NVR opens to the login interface.
Configure how long the user can be inactive before the NVR
automatically logs out the inactive user. Select from 0 to 60
minutes.
Check to enable the navigation bar, and it appears on the GUI.
Configure an interval for synchronizing the NVR's time with the IP
camera time.
in the Setting interface to open the Encode interface.
NVR Configurations | 63
800-18160 - B - 07/2014