Honeywell HEN04101(X) User Manual page 111

Configuration
IP Search
Add
Show Filter
Delete
Manual Add
Adding a Remote Device/Camera
1.
Figure 3-54 Remote Device Configuration Interface
Table 3-27 Remote Device Configurations
Description
Click to search for an IP address.
Click to connect to the selected, found IP device (camera), and add it to the Added device
list.
Note You can batch add more than one device.
Displays the specified devices from the added device.
Select a device in the Added device list, and then click Delete to remove it.
Click to manually add a camera. The port number is 37777. The default user name is
admin, and the default password is 1234.
Click Manual Add in the Remote Device configuration interface. The Manual Add
configuration interface appears.
NVR Configurations | 111
800-18160 - B - 07/2014