Honeywell HEN04101(X) User Manual page 153

Figure 5-19 Alarm Configuration Interface
Table 5-6 Alarm Configurations
Configuration Type Configuration
Motion Detection Click to enable Motion Detection. The
Video Masking
Video Loss
External Alarm
Alarm Type
Disk Error
Disk Full
No Signal
Prompt Prompt
Alarm Sound
Alarm Sound
Sound Path
Web Operation | 153
Description
system will then trigger an alarm when motion
is detected under the specified
circumstances.
Click to enable Video Masking. The system
triggers an alarm when camera masking
occurs.
Click to enable Video Loss. The system then
an alarm when video loss occurs.
Click to enable the camera's External Alarm,
the On/Off signal from the network camera. It
activates the NVR to locally activate.
Click to enable the Disk Error alarm. The
system triggers an alarm when a disk error
occurs.
Click to enable the Disk Full alarm. The
system triggers an alarm when the disk is full.
Click to enable the No Signal alarm. The
system triggers an alarm when the network
camera and the NVR are disconnected.
Click to enable the Prompt. Then the system
automatically pops up an alarm icon on the
Alarm button on the Main interface when
there is an alarm.
Click to enable the Alarm Sound. Then the
system triggers an alarm sound when an
alarm occurs. You can choose the sound.
Select the sound file.
800-18160 - B - 07/2014