Configuring Local Storage For Schedules; Configuring The Hdd Group Settings - Honeywell HEN04101(X) User Manual

3. Configure the schedule, then click Save.
Table 5-21 Schedule Configurations
Configuration
Channel
Regular
Motion
Alarm
MD&Alarm
4. Click Save to save the settings, and then click Save to save the Schedule configuration.

Configuring Local Storage for Schedules

Click Local Storage in the Schedule configuration interface to open the Local Storage
configuration interface.
Figure 5-50 Local Storage Configuration Interface for Schedules
You can see the HDD information, and you can select the read-only / write-only redundancy (if
there is more than one HDD), and formatting.

Configuring the HDD Group Settings

Click HDD Setting in the Schedule configuration interface to open the HDD Setting
configuration interface.
Figure 5-51 HDD Setting Configuration Interface
Select the HDD group in which you want to save the recording.
Description
Select a channel from the drop-down list.
Check to enable the Regular schedule mode.
Check to enable the Motion Detection schedule mode.
Check to enable the Alarm mode.
Check to enable the MD&Alarm mode.
Web Operation | 187
800-18160 - B - 07/2014