Table of Contents
Advertisement
HDD Group: The SN of the HDD Group management. See
Settings on page
Note
Ensure that you have set the HDD Group for each channel. If you fail to set the
HDD Group for a channel, then you will not be able to save the current setup.
Note
When you change the HDD Group settings, the system will save the recorded
video and snapshots, then reboot.
TIPS!
There is an easy way to test whether or not the recordings from the corresponding channel are
saved in the specified HDD. Remove the HDD and then check to see if the channel can record.
The channel should not record, and you should not be able to search the previous recordings.
Configuring Abnormality Settings
Click ABNORMALITY in the ADVANCED configuration interface. The ABNORMALITY
configuration interface appears.
115.
NVR Configurations | 117
Configuring HDD Group
800-18160 - B - 07/2014
Hide quick links:
Advertisement
Table of Contents
