General Settings; Date & Time Settings - Honeywell HEN04101(X) User Manual

Figure 5-56

General Settings

General Settings
Table 5-23 General Settings Configurations
Configuration
Device Name
Device No.
Language
Video Standard
HDD Full
Pack Duration
Date & Time Settings
Click the Date & Time tab in the General settings configuration interface to open the Date &
Time configuration interface.
Description
Enter a device name.
Enter a channel number.
Select a GUI language from the drop-down list.
Note You need to reboot the device/NVR to activate this
change.
Select the video standard, either NTSC or PAL.
Select what happens when the NVR's storage is full. Select
either Stop Recording or OverWrite.
Stop Recording: If the HDD is full, the NVR stops recording.
OverWrite: If the currently working HDD is full and the next
HDD is also full, the NVR overwrites the previous files.
Select the recording duration. Select from 1 to 120 minutes.
The default is 60 minutes.
Web Operation | 191
800-18160 - B - 07/2014