Configuring Camera Masking Settings
If something masks or blocks part of the camera lens, or if the output video turns to one color
due to a change in the environment's lighting, the system can alert you to guarantee video
continuity.
Select Camera Masking from the Event Type drop-down list.
Figure 3-50
Camera Masking Configuration Interface
Table 3-25
Camera Masking Detection Configurations
Configuration
Event Type
Channel
Enable
Description
Select the event detection type. Select from Motion
Detection, Video Loss, or Camera Masking.
Select a channel.
Click to enable event detection.
NVR Configurations | 103
800-18160 - B - 07/2014