Honeywell HEN04101(X) User Manual page 48

48 | Performance Series Network Video Recorder User Guide
Number Name
9
10
11
12
OTHER FUNCTIONS
14
15
16
www.honeywell.com/security
Table 3-4 Search GUI
Time Bar Unit
Backup
Clip
Record Type
Other Channel
Synchronization Switch to
Play When Playing Back
Digital Zoom
Manually Switch Channel
When Playing Back
Function
Select from: 24H, 12H, 1H, and 30M. The smaller the
unit, the more magnified the time bar. The time bar
allows you to select a more accurate time for
playback.
The time bar begins at 00:00 when you are setting
the configuration. The time bar displays the time
period for the video that is playing, plus a range of
time before and after.
1. From the File list, select the file(s) that you want
to back up. The system allows you to select up to
four channels.
2. Click the Backup button. The Backup menu
appears.
3. Click Start to begin backing up the file(s).
Check the file again to cancel the current selection.
The NVR can display up to 32 files from one channel.
The Clip button is used to edit files.
1. While playing the file you want to edit, click Clip
when you want to edit that file.
A slide bar appears that corresponds to the
channel for the recorded video.
2. Adjust the time slide bar or enter a specific time
for the recorded file end time.
3. Click Clip again, and then save the current file as
a new file.
While in any playback mode, the time bar changes if
you modify the Search type.
When playing a video file, click a channel number
button to switch to video from another channel that
was recorded at that time.
1. When in full-screen playback, left-click your
mouse on the screen.
2. Drag your mouse across the screen to select a
region, then left-click the mouse to open Digital
Zoom.
Right-click your mouse to exit Digital Zoom.
When in full-screen playback, you can switch to
another channel either by using the drop-down list or
by scrolling your mouse.
This function is not available if there is no recorded
file or if the NVR is conducting a Smart Search.