Honeywell HEN04101(X) User Manual page 167

Figure 5-33 DDNS Configuration Interface
Operation Before you can use Honeywell DDNS, you need to enable this service and
configure the proper server address, port value, and domain name.
Table 5-15 DDNS Configurations
Parameter
DDNS Type
Server IP
Domain Mode
Domain Name
Username
Note Do not register frequently. You need to wait at least 60 seconds between
registration requests. Too many registration requests might leave your server
vulnerable to attacks.
Note The system DDNS server might take back a domain name that is idle for one
year. If you configure your email address in the DDNS configuration, you will get
a notification email before the domain name is taken back.
Description
You can select the DDNS protocol from the drop-down list, and
then enable the DDNS function. Select the Honeywell DDNS
server (which is free) to enable the DDNS function.
This is the DDNS server IP address. Under Honeywell DDNS, the
default server address is www.hennvr-ddns.com.
Select Default Domain or Custom Domain Name. The default is
Default Domain. If you select Custom Domain Name, then you
must enter a domain name.
The default domain name is
You can define the prefix.
The user name you enter to log in the server (Optional).
Web Operation | 167
MAC address.hennvr-ddns.com.
800-18160 - B - 07/2014