Configuring Alarm Output; Playing Back Recorded Video - Honeywell HEN04101(X) User Manual

148 | Performance Series Network Video Recorder User Guide

Configuring Alarm Output

1.
2.

Playing Back Recorded Video

1.
www.honeywell.com/security
Figure 5-12 Image Settings
Table 5-5 Image Settings
Setting Description
Adjusts the monitor's video brightness.
Adjusts the monitor's video contrast.
Adjusts the monitor's video hue.
Adjusts the monitor's video saturation.
Restores the system to its defaults value.
Note All of these configurations apply only to the Web viewer.
Click to open the Alarm Out configuration interface.
Figure 5-13 Alarm Out Configuration Interface
Disable/enable the alarm signal for the corresponding port.
Click the Playback tab at the top of the Main window.
The Playback interface appears.