Honeywell HEN04101(X) User Manual page 71

Performance series
Table of Contents

Advertisement

Table 3-12
Network Configurations
Parameter
DHCP
TCP Port
UDP Port
HTTP Port
RTSP Port
Note
If you change and any of the above port settings, you must reboot your NVR to
activate those saved settings. Please ensure that the these port settings do not
conflict.
Max Connection
MTU
MTU Values (reference
only)
Preferred DNS Server
Alternate DNS Server
Transfer Mode
LAN Download
Function
Used to automatically search for the IP address. When the
DHCP function is enabled, you can not modify the IP address,
Subnet mask, or Gateway. If you have not enabled DHCP, the
IP address, Subnet mask, and Gateway are all 0 by default.
To view the current the IP information, you must turn off
DHCP.
You can not modify the IP address, Subnet mask, or Gateway
if you are using PPPoE.
Default is 37777. This value is configurable.
Default is 37778. This value is configurable.
Default is 80.
Default is 554.
The NVR can support up to 20 users. 0 means that this NVR
can not connect to any PC or other device.
Configure the MTU value for the network adapter. Select from
1280 to 7200 bytes. The default is 1500 bytes.
Note
MTU modification can affect the current network
service. Click OK to confirm a reboot, or click Cancel
to cancel the modifications.
Note
Before configuring the MTU for the NVR, check the
gateway's MTU. The NVR's MTU should be the same
or lower than the MTU's gateway. This helps to reduce
the number of packets and increases network
transmission efficiency.
1500: The Ethernet information packet maximum value. This
is also the default value, especially where there is no PPPoE
or VPN. This is also the default setup for some routers,
switches, or the network adapter.
1492: The recommended value for PPPoE.
1468: The recommended value for DHCP.
Please ensure that the MTU port does not conflict with other
ports.
Enter the preferred DNS server IP address.
Enter an alternate DNS server IP address.
Select a priority, either Fluency or Video Quality.
If you enable this function, the NVR can process the
downloaded data first. Select a download speed, either 1.5x
or 2.0x the normal speed.
NVR Configurations | 71
800-18160 - B - 07/2014

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hen04111(x)Hen04121(x)

Table of Contents