Ii-4-6 Active Directory/Ldap; Ii-4-6-1 General Setup - Draytek Vigor2860 User Manual

I I - 4 - 6 A c
I I - 4 - 6 A c
Lightweight Directory Access Protocol (LDAP) is a communication protocol for using in TCP/IP
network. It defines the methods to access distributing directory server by clients, work on
directory and share the information in the directory by clients. The LDAP standard is
established by the work team of Internet Engineering Task Force (IETF).
As the name described, LDAP is designed as an effect way to access directory service without
the complexity of other directory service protocols. For LDAP is defined to perform, inquire
and modify the information within the directory, and acquire the data in the directory
securely, therefore users can apply LDAP to search or list the directory object, inquire or
manage the active directory.
I I - 4 - 6 - 1 G
I I - 4 - 6 - 1 G
This page allows you to enable the function and specify general settings for LDAP server.
Available settings are explained as follows:
Item
Enable
Bind Type
Vigor2860 Series User's Guide
t i v e D i r e c t o r y / L D
t i v e D i r e c t o r y / L D
e n e r a l S e t u p
e n e r a l S e t u p
Description
Check to enable such function.
There are three types of bind type supported.



For the regular mode, you'll need to type in the Regular DN
A P
A P
Simple Mode – Just simply do the bind authentication
without any search action.
Anonymous – Perform a search action first with
Anonymous account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check
if you have the search authority.
199