Draytek Vigor2860 User Manual page 698

Available settings are explained as follows:
Item
Enable Data Flow Monitor
Refresh Seconds
Refresh
Index
IP Address
TX rate (kbps)
RX rate (kbps)
Sessions
Action
684
Description
Check this box to enable this function.
Use the drop down list to choose the time interval of
refreshing data flow that will be done by the system
automatically.
Click this link to refresh this page manually.
Display the number of the data flow.
Display the IP address of the monitored device.
Display the transmission speed of the monitored device.
Display the receiving speed of the monitored device.
Display the session number that you specified in Limit
Session web page.
Block - can prevent specified PC accessing into Internet
within 5 minutes.
Vigor2860 Series User's Guide