Draytek Vigor2860 User Manual page 228

Config Sync Interval
Exclude the following
settings from config sync
When you finish the configuration, please click OK to save and exit this page.
E x a m p l e
E x a m p l e
Take the following picture as an example. The upper Vigor2860 is regarded as primary device,
the lower Vigor2860 is regarded as secondary device. When primary Vigor2860 Series is
broken down, the secondary device could replace the primary role to take over all jobs as
soon as possible. However, once the primary device is working again, the secondary device
would be changed to original role to stand by.
214
redundancy method only.
Day / Hour / Minute - Primary router will sync its
configuration to secondary router based on the time interval
set here.
Settings selected in this field will be excluded when
executing configuration synchronization. For example, under
active-standby mode, WAN settings will not be synchronized.
:
:
Vigor2860 Series User's Guide