Draytek Vigor2860 User Manual page 878

voip sip acc n [-<command> <parameter> | ... ]
voip sip calllog
voip sip ep n [-<command> <parameter> | ... ]
voip sip misc[-<command> <parameter> | ... ]
voip sip nat [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
voip sip acc - Allows users to set SIP account.
n
-P [profile]
-r [reg mode]
-o [port]
-d [domain]
-y [proxy]
-b [enable]
-s [enable]
-N [name]
-n [number]
-a [id]
-A [enable]
-p [passwd]
-e [sec]
-w [enable]
-m [mode]
864
D e s c r i p t i o n
D e s c r i p t i o n
Description
n = 1 to 12
It means the index number of the VoIP settings.
It means the name of the account profile (maximum 11 characters).
Set registration mode for SIP account.
0 – none
1 – auto
2 - wan1 only
3 - wan2 only
4 - lan/vpn
5 – PVC
6 - wan3 only
7 - wan4 only
8 - wan1 first
9 - wan2 first
10 - wan3 first
11 - wan4 first
Set the port number for sending/receiving SIP message for building
a session. The default value is 5060.
Set the domain name or IP address of the SIP Registrar server. The
maximum is 63 characters.
Set domain name or IP address of SIP proxy server. The maximum is
63 characters.
Enable / disable outbound proxy by SIP account.
0 – disable
1 - enable
Enable / disable to locate SIP server (rfc 3263).
0 – disable
1 - enable
Set SIP account display name.
Name - max. 23 characters.
Set SIP account number.
Number - max. 63 characters.
Set SIP authentication ID.
Id - max. 63 characters.
Enable /disable to use SIP authentication ID.
0 – disable
1 - enable
Set SIP account password (max. 63 characters).
Set expiry time (default 3600) for SIP account.
Enable to make phone call without registering.
Set NAT traversal mode.
Vigor2860 Series User's Guide