Draytek Vigor2860 User Manual page 779

-G [default/specific]
-L [default/specific]
-s [value]
-S [value]
-d [value]
-D [value]
-p [value]
-P [value]
-y [value]
-I [value]
-g [value]
-l [value]
-t [value]
-n [0/1]
-a [0/1]
-f [value]
-b [value]
Vigor2860 Series User's Guide
Any: It means any port number can be used as destination port.
Specify the gateway mode.
Specify the failover gateway mode.
Indicate the source IP start.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g, 192.168.1.0)
Indicate the source IP end.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g,
192.168.1.100)
Indicate the destination IP start.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g, 192.168.2.0)
Indicate the destination IP end.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g,
192.168.2.100)
Indicate the destination port start.
Value: Type a number (1 ~ 65535) as the port start (e.g., 1000).
Indicate the destination port end.
Value: Type a number (1 ~ 65535) as the port end (e.g., 2000).
Indicate the priority of the policy route profile.
Value: Type a number (0 ~ 250). The default value is "150".
Indicate the interface specified for the policy route profile.
Value: Available interfaces include,
LAN1 ~ LAN8, IP_Routed_Subnet,
DMZ_Subnet,
WAN1 ~ WAN5,
VPN_PROFILE_1 ~ VPN_PROFILE_100,
WAN_1_IP_ALIAS_1 ~ WAN_4_IP_ALIAS_8
Indicate the gateway IP address.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g, 192.168.3.1)
Indicate the failover IP address.
Value: The type format shall be "xxx.xxx.xxx.xxx". (e.g, 192.168.4.1)
It means "protocol".
Value: Available settings include "TCP", "UDP", "TCP/UDP", "ICMP"
and "Any".
Indicates the function of "Force NAT".
0: Disable the function.
1: Enable the function.
Indicates to enable the function of failover.
0: Disable the function.
1: Enable the function.
It means to specify the interface for failover.
Value: Avaialbe interfaces include,
NO_FAILOVER,
Default_WAN,
Policy1 ~ Policy60
LAN1 ~ LAN8
IP_Routed_Subnet,
DMZ_Subnet,
WAN1 ~ WAN5,
VPN_PROFILE_1 ~ VPN_PROFILE_100,
WAN_1_IP_ALIAS_1 ~ WAN_4_IP_ALIAS_8
It means "failback".
765