Ldap /Active Directory Setup - Draytek Vigor2860 Series User Manual

Destination Port
Shared Secret
Confirm Shared Secret
After finished the above settings, click OK button to save the settings.
3 . 9 . 4 L D A P / A
3 . 9 . 4 L D A P / A
Lightweight Directory Access Protocol (LDAP) is a communication protocol for using in
TCP/IP network. It defines the methods to access distributing directory server by clients, work
on directory and share the information in the directory by clients. The LDAP standard is
established by the work team of Internet Engineering Task Force (IETF).
As the name described, LDAP is designed as an effect way to access directory service without
the complexity of other directory service protocols. For LDAP is defined to perform , inquire
and modify the information within the directory, and acquire the data in the directory securely,
therefore users can apply LDAP to search or list the directory object, inquire or manage the
active directory.
G e n e r a
G e n e r a
This page allows you to enable the function and specify general settings for LDAP server.
Vigor2860 Series User's Guide
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret. The
maximum length of the shared secret you can set is 36
characters.
Re-type the Shared Secret for confirmation.
c t i v e D i r e c t o r y S
c t i v e D i r e c t o r y S
l S e t u p
l S e t u p
e t u p
e t u p
216