Available settings are explained as follows:
Item
Enable
Refresh Min(s)
Refresh
Ch
SSID
Mode
BSSID
Security
Signal (%)
Beacon Period
Last Detected
Vigor2860 Series User's Guide
Description
Neighbor AP Detection – The access point(s) registered to
Vigor2860 will be used to detect other access points and send
the scanned results to Vigor2860. Later, the scanned result
will be displayed on this page.
Local WLAN Detection – The router will detect all the access
points through wireless LAN connection.
Specify the access points which are classified under each type.
Use the drop down list to specify the time to refresh the web
page.
Click such link to refresh the web page immediately.
Display the channel used by the detected access point.
Display the SSID specified for the detected access point.
Display the mode (AP or Ad Hoc) used by the detected access
point.
Display the MAC address of the detected access point.
Display the encryption mode used by the access point.
Display the signal strength (represented by percentage) sent
by the access point.
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Display the date and time that such access point was detected
by Vigor router.
601