Vii-7-6 Database Setup - Draytek Vigor2860 User Manual

V I I - 7 - 6 D
V I I - 7 - 6 D
The database of switch can be used to record alert logs and traffic history. This page is used
to determine if it is necessary for the user information to be recorded in the database of
switch.
Available settings are explained as follows:
Item
Enable Database to Record
alert logs and traffic
history
Notification and Action when Storage Exceeded
Notification
Action
After finished the settings, click OK to save the configuration.
Vigor2860 Series User's Guide
a t a b a s e S e t u p
a t a b a s e S e t u p
Description
Check the box to make the database (in USB disk) to record
the alert logs and traffic history.
Don't send notification – No notification will be sent out
when there is no capacity for storage in USB.
Send notification – A notification will be sent out when there
is no capacity for storage in USB.
Stop recording user information – When the capacity of log
is full, the system will stop recording.
Backup and clean up all user infor, and start a new record
- Only the newest events will be recorded by the system.
625