Draytek Vigor2860 User Manual page 331

D e t a i l e d
D e t a i l e d
Click the number link for Phone port, you can access into the following page for configuring
Phone settings.
Available settings are explained as follows:
Item
Hotline
Session Timer
T.38 Fax Function
DND (Do Not Disturb)
mode
CLIR (hide caller ID)
Call Waiting
Call Transfer
Vigor2860 Series User's Guide
S e t t i n g s f o r P h o n e P o
S e t t i n g s f o r P h o n e P
Description
Check the box to enable it. Type in the SIP URL in the field
for dialing automatically when you pick up the phone set.
Check the box to enable the function. In the limited time
that you set in this field, if there is no response, the
connecting call will be closed automatically.
Check the box to enable T.38 fax function.
Error Correction Mode – choose a mode for error correction.
Set a period of peace time without disturbing by VoIP phone
call. During the period, the one who dial in will listen busy
tone, yet the local user will not listen any ring tone.
Index (1-15) in Schedule - Enter the index of schedule
profiles to control when the phone will ring and when will
not according to the preconfigured schedules. Refer to
section Application >>Schedule for detailed configuration.
Index (1-60) in Phone Book - Enter the index of phone book
profiles. Refer to section DialPlan – Phone Book for detailed
configuration.
Check this box to hide the caller ID on the display panel of
the phone set.
Check this box to invoke this function. A notice sound will
appear to tell the user new phone call is waiting for your
response. Click hook flash to pick up the waiting phone call.
Check this box to invoke this function. Click hook flash to
initiate another phone call. When the phone call connection
r t
o r t
317