Ii-1-2-1 Details Page For Pppoe In Wan1 (Physical Mode: Vdsl2) - Draytek Vigor2860 User Manual

I I - 1 - 2 - 1 D
I I - 1 - 2 - 1 D
To choose PPPoE as the accessing protocol of the Internet, please select PPPoE from the
WAN>>Internet Access >>WAN1 page. The following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
Modem Setting (for ADSL
only)
PPPoE Pass-through
WAN Connection
Detection
80
e t a i l s P a g e f o r P P P o
e t a i l s P a g e f o r P P P o
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
It is not necessary to configure settings in these fields for
modem settings are prepared for ADSL only.
The router offers PPPoE dial-up connection. Besides, you
also can establish the PPPoE connection directly from local
clients to your ISP via the Vigor router. When PPPoA protocol
is selected, the PPPoE package transmitted by PC will be
transformed into PPPoA package and sent to WAN server.
Thus, the PC can access Internet through such direction.
For Wired LAN – If you check this box, PCs on the same
network can use another set of PPPoE session (different with
the Host PC) to access into Internet.
For Wireless LAN – It is available for n model. If you check
this box, PCs on the same wireless network can use another
set of PPPoE session (different with the Host PC) to access
into Internet.
Note: To have PPPoA Pass-through, please choose PPPoA
protocol and check the box(es) here. The router will behave
like a modem which only serves the PPPoE client on the LAN.
That's, the router will offer PPPoA dial-up connection.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
E i n W A N 1 ( P h y s i c a
E i n W A N 1 ( P h y s i c a
l M o d e : V D S L 2 )
l M o d e : V D S L 2 )
Vigor2860 Series User's Guide