Draytek Vigor2860 User Manual page 141

MPoA (RFC1483/2684)
After finished the above settings, click OK to save the settings and return to previous page.
Vigor2860 Series User's Guide
ISP Address from ISP - Specifies how the WAN IP address of
the channel configured.

Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the
ISP's PPPoE/PPPoA server.
This section is available when WAN Type is ADSL and the
Protocol is MPoA, or when WAN Type is VDSL or
Ethernet(WAN2) and the WAN Setup is Static or Dynamic
IP.
Obtain an IP address automatically – Select this option if the
router is to receive IP configuration information from a DHCP
server.

Router Name – Sets the value of DHCP Option 12, which
is used by some ISPs.

Domain Name – Sets the value of DHCP Option 15,
which is used by some ISPs.
Specify an IP address – Select this option to manually enter
the IP address.

IP Address – Type in the IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
127