Draytek Vigor2860 User Manual page 907

E x a m p l
E x a m p
> wan detect_mtu -w 2 -i 8.8.8.8 -s 1500 -d 30 -c 10
detecting mtu size:1500!!!
mtu size:1470!!!
T e l n e t C o m m
T e l n e t C o m m
This command allows you to run a WAN MTU Discovery. The user can specify an IPv6 target to
ping and find the suitable MTU size of the WAN interface.
S y n t a x
S y n t a x
wan detect_mtu6 –w [number] –i [IPv6 address] –s [base_size]
S y n t a x
S y n t a x
Parameter
-w [number]
-I [IPv6 address]
-s [base_size]
E x a m p l
E x a m p
> wan detect_mtu6 -w 2 -i 2404:6800:4008:c06::5e -s 1500
>
T e l n e t C o m m
T e l n e t C o m m
This command is used to configure a profile (Hotspot Web Portal) with specified URL for
accessing into or display a message when a wireless/LAN user connects to Internet through
this router.
S y n t a x
S y n t a x
hsportal setup -p <profile> [-l <lan>] [-s <ssid>] ...
hsportal setup -p <profile> -c
S y n t a x
S y n t a x
Parameter
-p
-l
-s
-a
-m
Vigor2860 Series User's Guide
count: Available settings are 1 ~ 10. Default value is 3.
e
l e
a n d : w a n d e t e c t _
a n d : w a n d e t e c t _
D e s c r i p t i o n
D e s c r i p t i o n
Description
Specify the WAN interface
number: Type the number of WAN interface. 1: WAN1; 2:WAN2....and
etc.
Specify the IPv6 target to detect. It must be an IPv6 IP address.
IPv6 address: Type the IPv6 address of the target.
Specify the size of MTU.
base_size: Available setting is 1000 ~ 1500.
e
l e
a n d : h s p o r t a l
a n d : h s p o r t a l
D e s c r i p t i o n
D e s c r i p t i o n
Description
Indicate available profile to be configured.
Number of profile: 1 /2 /3 / 4.
Apply to LAN interfaces. E.g., apply LAN1 and LAN2:
-l 1, 2.
Apply to WLAN interfaces. E.g., apply SSID1 and SSID2:
-s 1, 2.
Apply to WLAN5G interfaces. E.g., apply SSID1 and SSID2:
-s 1, 2.
Select login mode.
0:skip
1:click
m t u 6
m t u 6
893