Viii-2-2 Usb User Management - Draytek Vigor2860 User Manual

SMB File Sharing Service
Access Mode
NetBios Name Service
Printer Server
After finishing all the settings here, please click OK to save the configuration.
V I I I - 2 - 2
V I I I - 2 - 2
This page allows you to set profiles for FTP/SMB users. Any user who wants to access into the
USB storage disk must type the same username and password configured in this page. Before
adding or modifying settings in this page, please insert a USB storage disk first. Otherwise, an
error message will appear to warn you.
Click index number to access into configuration page.
662
Click Enable to invoke SMB service (file sharing) via the
router.
LAN Only – Users coming from internet cannot connect to the
SMB server of the router.
LAN And WAN - Both LAN and WAN users can access SMB
server of the router.
For the NetBios service of USB storage disk, you have to
specify a workgroup name and a host name. A workgroup
name must not be the same as the host name. The workgroup
name can have as many as 15 characters and the host name
can have as many as 23 characters. Both them cannot
contain any of the following--- ; : " < > * + = \ | ?.
Workgroup Name – Type a name for the workgroup.
Host Name – Type the host name for the router.
Enable – Click it to make Vigor router act as a printer server
(with USB printer attached).
U S B U s e r M a n a g
U S B U s e r M a n a g
e m e n t
e m e n t
Vigor2860 Series User's Guide