Draytek Vigor2860 User Manual page 343

VPN Dial-Out Through
Always On
Server IP/Host Name
for VPN
IKE Authentication
Method
Digital Signature
(X.509)
Vigor2860 Series User's Guide
Use the drop down menu to choose a proper WAN interface
for this profile. This setting is useful for dial-out only.
Or,
WAN1 First/ WAN2 First /WAN3 First/WAN4/LTE First-
While connecting, the router will use
WAN1/WAN2/WAN3/WAN4/LTE as the first channel for VPN
connection. If WAN1/WAN2/WAN3/WAN4/LTE fails, the
router will use another WAN interface instead.
WAN1 Only /WAN2 Only/WAN3 Only/WAN4/ LTE Only -
While connecting, the router will use
WAN1/WAN2/WAN3/WAN4/LTE as the only channel for VPN
connection.
WAN1 Only: Only establish VPN if WAN2 down - If WAN2
failed, the router will use WAN1 for VPN connection.
WAN2 Only: Only establish VPN if WAN1 down - If WAN1
failed, the router will use WAN2 for VPN connection.
Check to enable router always keep VPN connection.
Type the IP address of the server or type the host name for
such VPN profile.
IKE Authentication Method usually applies to those are
remote dial-in user or node (LAN to LAN) which uses dynamic
IP address and IPsec-related VPN connections such as L2TP
over IPsec and IPsec tunnel.
Pre-Shared Key- Specify a key for IKE authentication.
Confirm Pre-Shared Key-Confirm the pre-shared key.
Click Digital Signature to invoke this function.
Peer ID – Choose the peer ID selection from the drop down
list.
329