Draytek Vigor2860 User Manual page 97

I I - 1 - 2 - 2 D
I I - 1 - 2 - 2 D
V D S L 2 )
V D S L 2 )
MPoA is a specification that enables ATM services to be integrated with existing LANs, which
use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow different
LANs to send packets to each other via an ATM backbone.
To use Static or Dynamic IP as the accessing protocol of the Internet, select Static or
Dynamic IP from the WAN>>Internet Access >>WAN1 page. The following web page will
appear.
Available settings are explained as follows:
Item
Enable/Disable
Modem Setting (for ADSL
only)
WAN Connection
Detection
Vigor2860 Series User's Guide
e t a i l s P a g e f o r M P o
e t a i l s P a g e f o r M P o
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
It is not necessary to configure settings in these fields for
modem settings are prepared for ADSL only.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect, Ping Detect or Always On for
the system to execute for WAN detection. If you choose Ping
Detect as the detection mode, you have to type required
settings for the following items.


A / S t a t i c o r D y n a m i
A / S t a t i c o r D y n a m i
Primary/Secondary Ping IP – If you choose Ping Detect as
detection mode, you have to type Primary or Secondary IP
address in this field for pinging.
Ping Gateway IP – If you choose Ping Detect as detection
c I P i n W A N 1 ( P h y s i
c I P i n W A N 1 ( P h y s
c a l M o d e :
i c a l M o d e :
83