Draytek Vigor2860 User Manual page 862

T e l n e t C o m m
T e l n e t C o m m
This command is used for RD debug.
S S y y n n t t a a x x
sys diag_log [status| enable| disable| flush| lineno [w] | level [x] | feature [on|off] [y]|
log]
S y n t a x
S y n t a x
Parameter
status
enable
disable
flush
lineno [w]
level[x]
feature [on/off][y]
voip_feature
[on/off][vf_name]
log
E x a m p l
E x a m p
> sys diag_log status
Status:
diag_log is Enabled.
lineno : 10000.
level : 3.
Enabled feature: SYS DSL
> sys diag_log log
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
0:00:02
FirmwareRequest(1)
0:00:02
0:00:02
848
a n d : s y s d i a g _ l o g
a n d : s y s d i a g _ l o g
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the status of diagnostic log.
It means to enable the function of diag_log.
It means to disenable the function of diag_log.
It means the flush log buffer.
It means the total lines for displaying message.
w - Available value ranges from 100 to 50000.
It determines the level of data displayed.
x – Available value ranges from 0 to 12. The larger the number is,
the detailed the data is displayed.
It is used to specify the function of the log. Supported features
include SYS and DSL (Case-Insensitive). Default setting is "on" for
"DSL".
It means VoIP feature. Type on to enable the feature or type off to
disable the feature.
vf_name: available settings include DRVTAPI, DRVVMMC, DRVMPS,
DRVFXO, DRVHAL, PSMPHONE, PSMSUPP, PSM, FXO, PSMISDN,
DTMFPSER, CALLERID (Case-Insensitive).
It means the dump log buffer.
e
l e
[DSL] Current modem firmware: AnnexA_548006_544401
[DSL] Modem firmware feature: 5, ADSL_A, VDSL2
[DSL] xtseCfg=04 00 04 00 0c 01 00 07
[DSL] don't have last showtime mode!! set next mode to VDSL!!
[DSL] Status has changed: Stopped(0) -> FwWait(3)
[DSL] Status has changed: FwWait(3) -> Starting(1)
[DSL] Status has changed: Starting(1) -> Running(2)
[DSL] Status was switched: firmwareReady(3) to Init(5)
[DSL] Status was switched: Init(5) to Restart(10)
[DSL] Status was switched: Restart(10) to
[DSL] Line state has changed: 00000000 -> 000000FF
[DSL] Entering VDSL2 mode
Vigor2860 Series User's Guide