Ii-1-2-7 Details Page For Pptp/L2Tp In Wan2 (Physical Mode: Ethernet) - Draytek Vigor2860 User Manual

I I - 1 - 2 - 7 D
I I - 1 - 2 - 7 D
To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP tab.
The following web page will be shown.
Available settings are explained as follows:
Item
PPTP/L2TP
ISP Access Setup
MTU
Vigor2860 Series User's Guide
e t a i l s P a g e f o r P P T P
e t a i l s P a g e f o r P P T P
Description
Enable PPTP- Click this radio button to enable a PPTP client
to establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP - Click this radio button to enable a L2TP client
to establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP or L2TP.
Server Address - Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address – Specify the gateway IP address
for DHCP server.
Username -Type in the username provided by ISP in this
field. The maximum length of the user name you can set is 63
characters.
Password -Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
It means Max Transmit Unit for packet.
Path MTU Discovery – It is used to detect the maximum MTU
size of a packet not to be segmented in specific transmit
path.
/ L 2 T P i n W A N 2 ( P h
/ L 2 T P i n W A N 2 ( P h
y s i c a l M o d e : E t h e r n
y s i c a l M o d e : E t h e r n
e t )
e t )
99