Draytek Vigor2860 User Manual page 930

-a
-m
Detail Level
E x a m p l
E x a m p
> ha status -m 2
% [Local Router] DrayTek
% IP
% Status
% High Availability
% Redundancy Method
% Group ID
% Priority ID
% Update DDNS
% Protocol
% Management Interface: LAN1
% Authentication Key : draytek
% Virtual IP: (Max. 7 Virtual IPs)
% ON
% Virtual IPv6: (Max. 7 Virtual IPv6s)
% ON
% ON
% ON
% ON
% ON
% ON
% ON
% Config Sync
% Config Sync Interval
% Cached Time
>
T e l n e t C o m m
T e l n e t C o m m
This command is used to display general setting of of VigorSwitch which connecting to Vigor
router in LAN.
S y n t a x
S y n t a x
swm show [LAN_port]
S y n t a x
S y n t a x
Parameter
LAN_port
E x a m p l
E x a m p
> swm show
** If you connected a VigorSwitch but does not display here.
** Please check the LLDP is enabled and VLAN ID is matched on VigorSwitch.
*****************************************************************************
LAN Port Model Name MAC IP Address Con Port
-------- ---------------- ------------ --------------- ---------
1 G1241 00507FF105FD 192.168.1.10 23
-----------------------------------------------------------------------------
Internal VLAN is [Enable]
Only show P1 related VLAN settings here.
VLAN Subn Tag VID Pri LAN WLAN(2.4G) WLAN(5G)
---- ---- --- ---- --- ------------------ ------------ ------------
0 LAN1 Off 0 0 P1,P2,P3,P4,P5,P6 none none
1 LAN1 On 20 0 P1,P2,P3,P4,P5,P6 none none
2 LAN1 On 100 0 P1,P2,P3,P4,P5,P6 none none
916
Show the status for all of the routers in HA group.
Show the status of local router only.
0: Important status.
1: Important status, plus some information.
2: Show settings
e
l e
: 192.168.1.1 (FE80::21D:AAFF:FEC6:4C50)
: !
: ! Disable
: Active-Standby
: 1
: 10
: Disable
: IPv4
LAN1 192.168.1.0
LAN1 FE80::200:5EFF:FE00:101
LAN2 FE80::200:5EFF:FE00:101
LAN3 FE80::200:5EFF:FE00:101
LAN4 FE80::200:5EFF:FE00:101
LAN5 FE80::200:5EFF:FE00:101
LAN6 FE80::200:5EFF:FE00:101
DMZ FE80::200:5EFF:FE00:101
: Disable
: 0 (s)
a n d : s w m s h o w
a n d : s w m s h o w
D e s c r i p t i o n
D e s c r i p t i o n
Description
Specify the LAN port number (1 to 6).
e
l e
: 0 Day 0 Hour 15 Minute
Vigor2860 Series User's Guide