Draytek Vigor2866 Series Quick Start Manual
G.fast security firewall
Hide thumbs
Also See for Vigor2866 Series:
- Quick start manual (28 pages) ,
- Quick start manual (26 pages) ,
- Quick start manual (4 pages)
Related Manuals for Draytek Vigor2866 Series
Summary of Contents for Draytek Vigor2866 Series
- Page 1 Vigor2866 Series G.Fast Security Firewall Quick Start Guide (for RF Model) Version: 1.2 Firmware Version: V4.0.5.1 (For future update, please visit DrayTek web site)
- Page 2 Date: April 28, 2020...
- Page 3 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected by Copyrights copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...
- Page 4 Declaration of Conformity Hereby, DrayTek Corporation declares that the radio equipment type Vigor2865 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://www.draytek.com.tw/ftp/Vigor2865/Document/CE/ Manufacturer: DrayTek Corp. Address: No.26 Fu Shing Rd., Hukou County, Hsin-Chu Industrial Park, Hsin-Chu City, Taiwan...
- Page 5 This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The antenna/transmitter should be kept at least 20 cm away from human body. DrayTek Vigor2865 series VDSL2/ADSL2+ routers are compliant with 47 C.F.R. Part 68. More update, please visit www.draytek.com.
-
Page 6: Table Of Contents
Table of Contents Table of Contents 1. Package Content.....................1 2. Panel Explanation....................2 2.1 Vigor2865FVac/Vigor2866FVac ....................2 2.2 Vigor2865ac/Vigor2866ac......................4 3. Hardware Installation....................8 3.1 Network Connection........................8 3.2 Wall-Mounted Installation......................11 4. Software Configuration..................12 4.1 Quick Start Wizard for Network Connection................12 5. -
Page 7: Package Content
Package Cont Package Cont Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Besides, the content is subject to the real package. Vigor router Antenna RJ-45 to RJ-45 Cable... -
Page 8: Panel Explanation
2. P anel Explanation 2. P anel Explanation Vigo 2865FVac/Vigor286 Vigo 2865FVac/Vigor286 Status Explanation The router is powered off. Blinking The router is powered on and running normally. WAN2 Internet connection is ready. Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. - Page 9 The port is connected with 10/100Mbps. Left The port is connected. The port is disconnected. P1~P5 Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps The port “WAN2 / P6” is switchable. It can be used for LAN connection or WAN connection according to the settings configured in WUI.
- Page 10 Connecter for accessing the Internet. Connecter for installing WLAN antennas. Connecter for a power adapter. ON/OFF Power Switch.
- Page 11 Vigor286 5ac/Vigor2866ac Vigor286 5ac/Vigor2866ac Status Explanation The router is powered off. Blinking The router is powered on and running normally. WAN2 Internet connection is ready. Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive.
- Page 12 Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps. Left The port is connected. The port is disconnected. P1~P5 Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps The port “WAN2 / P6”...
- Page 13 Connecter for accessing the Internet. Connecter for installing WLAN antennas. Connecter for a power adapter. ON/OFF Power Switch.
-
Page 14: Hardware Installation
3. Hardware Installation 3. Hardware Installation This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. (For the hardware connection, we take “ac” model as an example.) 3.1 Network Connection 3.1 Network Connection Connect the DSL interface to the land line jack with a DSL line cable, or... -
Page 15: Wall-Mounted Installation
3.2 Wall-Mounted Installation 3.2 Wall-Mounted Installation Vigor router has keyhole type mounting slots on the underside. Drill two holes on the wall. The distance between the holes shall be 168mm. Fit screws into the wall using the appropriate type of wall plug. Note The recommended drill diameter shall be 6.5mm (1/4”). -
Page 16: Software Configuration
4. Software Configuration 4. Software Configuration To access Internet, please finish basic configuration after completing the hardware installation. 4.1 Quick Start Wizard for Network Connection 4.1 Quick Start Wizard for Network Connection The Quick Start Wizard is designed for you to easily set up your router for Internet access. - Page 17 Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard. Note The home page will change slightly in accordance with the router you have. Here we take Vigor2865ac as an example. If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly.
- Page 18 On the next page as shown below, please select the WAN interface that you use. If DSL interface is used, please choose WAN1; if Ethernet interface is used, please choose WAN2; if wireless 2.4G/5G connection is used, please choose WAN3 or WAN4; if 3G USB modem is used, please choose WAN5 or WAN6. Then click Next for next step.
- Page 19 PPPoE/PPPoA PPPoE/PPPoA Choose WAN1 as WAN Interface and click the Next button; you will get the following page. 2. After finished the above settings, simply click Next.
- Page 20 3. Please manually enter the Username/Password provided by your ISP. Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
- Page 21 MPoA / Static or Dynamic IP MPoA / Static or Dynamic IP Choose WAN1 as WAN Interface and click the Next button; you will get the following page. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection.
-
Page 22: Customer Service
Web registration is preferred. You can register your Vigor router via http://www.draytek.com. Firmware & Tools Updates Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. http://www.draytek.com...