Draytek Vigor2860 User Manual page 200

5. Click OK button to activate the settings. You will see your setting has been saved.
D i s a b l e
D i s a b l e
Uncheck Enable Dynamic DNS Setup, and click Clear All button to disable the function and
clear all accounts from the router.
D e l e t e a
D e l e t e a
Click the Index number you want to delete and then click Clear All button to delete the
account.
186
t h e F u n c t i o n a n d C l e
t h e F u n c t i o n a n d C l e
D y n a m i c D N S A c c o u
D y n a m i c D N S A c c o u
When the WAN IP used by Vigor router is private IP, this
function can detect the public IP used by the NAT router and
use the detected IP address for DDNS update.
There are two methods offered for you to choose:
WAN IP - If it is selected and the WAN IP of Vigor router

is private, DDNS update will take place right away.
 Internet IP – If it is selected and the WAN IP of Vigor
router is private, it will be converted to public IP
before DDNS update takes place.
a r a l l D y n a m i c D N S A
a r a l l D y n a m i c D N S A
n t
n t
c c o u n t s
c c o u n t s
Vigor2860 Series User's Guide