Draytek Vigor2860 User Manual page 297

TX Power
WMM Capable
APSD Capable
Rate Adaptation Algorithm
Fragment Length
(256 – 2346)
RTS Threshold (1 – 2347)
Vigor2860 Series User's Guide
wireless client) invoke this function at the same time. That
is, the wireless client must support this feature and invoke
the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the following
picture of Vigor N61 wireless utility window, choose Enable
for TxBURST on the tab of Option).
Info * means the real transmission rate depends on
Set the power percentage for transmission signal of access
point. The greater the value is, the higher intensity of the
signal will be.
WMM is an abbreviation of Wi-Fi Multimedia. It defines the
priority levels for four access categories derived from 802.1d
(prioritization tabs). The categories are designed with
specific types of traffic, voice, video, best effort and low
priority data. There are four accessing categories - AC_BE ,
AC_BK, AC_VI and AC_VO for WMM.
To apply WMM parameters for wireless data transmission,
please click the Enable radio button.
APSD (automatic power-save delivery) is an enhancement
over the power-save mechanisms supported by Wi-Fi
networks. It allows devices to take more time in sleeping
state and consume less power to improve the performance
by minimizing transmission latency.
The default setting is Disable.
Wireless transmission rate is adapted dynamically. Usually,
performance of "new" algorithm is better than "old".
Set the Fragment threshold. Do not modify default value if
you don't know what it is, default value is 2346.
Minimize the collision (unit is bytes) between hidden stations
to improve wireless performance.
Set the RTS threshold. Do not modify default value if you
283