Draytek Vigor2860 User Manual page 65

Subnet Mask
Gateway
Back
Next
Cancel
3. Please type in the IP address information according to the settings of your Wireless AP.
Then click Next for next step.
Available settings are explained as follows:
Item
SSID
MAC Address
(Optional)
Channel
Security Mode
Back
Next
Cancel
Vigor2860 Series User's Guide
Type the subnet mask.
Type the IP address of gateway.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
Description
The identification of the Wireless AP.
The MAC Address of the Wireless AP.
The channel of frequency of the Wireless AP. Please notice
that, if this setting is modified, the channel of Wireless LAN
(2.4GHz) would be also modified.
The mode to connect to the Wireless AP.
Disable – The Router connects to the wireless AP

without any encryption mechanism.
WEP – The Router connects to the wireless AP as a WEP

client and the encryption key should be entered in WEP
Key.
WPA/PSK – The Router connects to the wireless AP as a

WPA client and the encryption key should be entered in
PSK.
WPA2/PSK – The Router connects to the wireless AP as a

WPA2 client and the encryption key should be entered
in PSK.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
51