Ii-1-2-16 Details Page For Ipv6 - Dhcpv6 Client In Wan1/Wan2 - Draytek Vigor2860 User Manual

I I - 1 - 2 - 1 6
I I - 1 - 2 - 1 6
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
DHCPv6 Client
Configuration
WAN Connection
Detection
Vigor2860 Series User's Guide
D e t a i l s P a g e f o r I P v
D e t a i l s P a g e f o r I P v
Description
IAID - Type a number as IAID.
DUID – Display the DHCP unique ID used by such WAN
interface.
Authentication Protocol – Such protocol will be used for
the client to be authenticated by DHCPv6 server before
accessing into Internet. There are three types can be
specified, Reconfigure Key, Delayed and None. In general,
the default setting is None.


Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for
the system to execute for WAN detection. With NS Detect
mode, the system will check if network connection is
6 D H C P v 6 C l i e n t i
6 – D H C P v 6 C l i e n t i
–
Reconfigure Key – During the connection process,
DHCPv6 server will authenticate the client
automatically.
Delayed - During the connection process, DHCPv6 server
will authenticate and identify the client based on the
key ID, realm and secret information specified in these
fields.
Key ID – Type a value (range from 1 to 65535) which will
be used to generate HMAC-MD5 value.
Realm – The name (1 to 31 characters) typed here will
identify the key which generates HMAC-MD5 value.
Secret – Type a text (1 to 31 characters) as s a unique
identifier for each client on each DHCP server.
n W A N 1 / W A N 2
n W A N 1 / W A N 2
115