Draytek Vigor2860 User Manual page 349

Pre-Shared Key
Confirm Pre-Shared
Key
Digital Signature
(X.509)
Peer IP/VPN Client IP
Peer ID
Remote Network IP
Remote Network
Mask
3. After finishing the configuration, please click Next. The confirmation page will be
shown as follows. If there is no problem, you can click one of the radio buttons listed on
the page and click Finish to execute the next action.
Available settings are explained as follows:
Item
Go to the VPN
Connection
Management
Do another VPN
Vigor2860 Series User's Guide
For IPsec/L2TP IPsec authentication, you have to type a
pre-shared key.
The length of the name is limited to 64 characters.
Type the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or Subject
Name First.
Type the WAN IP address or VPN client IP address for the
remote client.
Type the ID name for the remote client.
The length of the name is limited to 47 characters.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Please type the network mask (according to the real location
of the remote host) for building VPN connection.
Description
Click this radio button to access VPN and Remote
Access>>Connection Management for viewing VPN
Connection status.
Click this radio button to set another profile of VPN Server
335