Ii-4-5-3 External Tacacs - Draytek Vigor2860 User Manual

I I - 4 - 5 - 3 E
I I - 4 - 5 - 3 E
It means Terminal Access Controller Access-Control System Plus. It works like RADIUS does.
Click the External TACACS+ to open the following page:
Available settings are explained as follows:
Item
Enable
Server IP Address
Destination Port
Shared Secret
Confirm Shared Secret
After finished the above settings, click OK button to save the settings.
198
x t e r n a l T A C A C S +
x t e r n a l T A C A C S +
Description
Check to enable TACACS+ feature.
Enter the IP address of TACACS+ server.
The UDP port number that the TACACS+ server is using.
The TACACS+ server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Re-type the Shared Secret for confirmation.
Vigor2860 Series User's Guide