Ii-1-2-16 Details Page For Ipv6 - Dhcpv6 Client In Wan1/Wan2 - Draytek Vigor2862 Series User Manual

After finished the above settings, click OK to save the settings.
I I - 1 - 2 - 1 6
I I - 1 - 2 - 1 6
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
DHCPv6 Client
Configuration
Vigor2862 Series User's Guide
execute for WAN detection.


D e t a i l s P a g e f o r I P v
D e t a i l s P a g e f o r I P v
Description
IAID - Type a number as IAID.
DUID – Display the DHCP unique ID used by such WAN
interface.
Authentication Protocol – Such protocol will be used for
the client to be authenticated by DHCPv6 server before
accessing into Internet. There are three types can be
specified, Reconfigure Key, Delayed and None. In general,
the default setting is None.


Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
6 D H C P v 6 C l i e n t
6 D H C P v 6 C l i e n t
–
–
Reconfigure Key – During the connection process,
DHCPv6 server will authenticate the client
automatically.
Delayed - During the connection process, DHCPv6 server
will authenticate and identify the client based on the
key ID, realm and secret information specified in these
fields.
Key ID – Type a value (range from 1 to 65535) which will
be used to generate HMAC-MD5 value.
i n W A N 1 / W A N 2
i n W A N 1 / W A N 2
113