Ii-1-2-7 Details Page For Pptp/L2Tp In Wan2 (Physical Mode: Ethernet) - Draytek Vigor2862 Series User Manual

I I I I - - 1 1 - - 2 2 - - 7 7 D D
To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP tab.
The following web page will be shown.
Available settings are explained as follows:
Item
PPTP/L2TP
ISP Access Setup
MTU
98
e e t t a a i i l l s s P P a a g g e e f f o o r r P P P P T T
Description
Enable PPTP- Click this radio button to enable a PPTP client
to establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP - Click this radio button to enable a L2TP client
to establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP or L2TP.
Server Address - Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address – Specify the gateway IP address
for DHCP server.
Username -Type in the username provided by ISP in this
field. The maximum length of the user name you can set is 63
characters.
Password -Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
Schedule Profile - You can type in four sets of time schedule
for your request. All the schedules can be set previously in
Applications >> Schedule web page and you can use the
number that you have set in that web page.
It means Max Transmit Unit for packet.
Path MTU Discovery – It is used to detect the maximum MTU
size of a packet not to be segmented in specific transmit
P P / / L L 2 2 T T P P i i n n W W A A N N 2 2 ( ( P P h h y y s s i i c c a a l l M M o o d d e e : : E E t t h h e e
Vigor2862 Series User's Guide
r r n n e e t t ) )