Call Features Configuration; Configure The Number Of Call Appearances Per Line - Cisco 8851 Administration Manual

Call Features Configuration

Configure the Number of Call Appearances Per Line

Phones that support multiple call appearances on a line can be configured to specify the number of calls to
allow on the line.
Procedure
Step 1 Click Admin Login > advanced > Voice > Phone.
Step 2
In the Miscellaneous Line Key Settings section, use the Call Appearances Per Line drop-down list box to
specify the number of calls per line to allow.
Step 3 Click Submit All Changes.
Call Features Configuration
Enable Call Transfer
Procedure
Step 1 Click Admin Login > advanced > Voice > Phone.
Step 2 Under Supplementary Services, choose Yes for each of the transfer services that you want to enable:
• Attn Transfer Serv—Attended call transfer service. The user answers the call before transferring it.
• Blind Transfer Serv—Blind call transfer service. The user transfers the call without speaking to the
Step 3 To disable a transfer service, set the field to No.
Step 4
Click Submit All Changes.
Call Forward
To enable call forwarding, you can enable the feature in two places: on the Voice tab and the User tab of the
phone web page.
Enable Call Forwarding on Voice Tab
Perform this task if you want to enable call forward for a user.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
132
caller.