Firmware Upgrade - Cisco 8851 Administration Manual

Cisco IP Phone Web Page
Parameter
Log Request Msg
Log Success Msg
Log Failure Msg
HTTP Report Method
Report Rule
User Configurable Resync

Firmware Upgrade

Parameter
Upgrade Enable
Upgrade Error Retry Delay
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
232
Description
The message sent to the syslog server at the start of a resync attempt.
Default:
$PN $MAC –Requesting % $SCHEME://$SERVIP:$PORT$PATH
The syslog message issued upon successful completion of a resync
attempt.
Default:
$PN $MAC -Successful Resync
$SCHEME://$SERVIP:$PORT$PATH
The syslog message that is issued after a failed download attempt.
Default:
$PN $MAC -- Resync failed: $ERR
Allows to select HTTP options. Options are POST and PUT.
Specifies the destination for the report of the current internal
configuration that the phone sends to the provisioning server . The URL
in this field can include an encryption key.
• If the report method is PUT, you can enter the URL for the report
rule in this format:
http://my_http_server/config-mpp.xml
• If the report method is POST, you can enter the URL for the report
rule in this format:
http://my_http_server/report_upload.php
Allows a user to resync the phone from the phone screen.
Default: Yes
Description
Allows firmware update operations independent of resync actions.
Default: Yes
The interval applied in the event of an upgrade failure. The firmware
upgrade error timer activates after a failed firmware upgrade attempt
and is initialized with this value. The next firmware upgrade attempt
occurs when this timer counts down to zero.
Default: 3600 seconds
%