Network Settings - Cisco 8851 Administration Manual

Cisco IP Phone Web Page
Parameter
User Password
Phone-UI-readonly
Phone-UI-User-Mode

Network Settings

Parameter
IP Mode
IPv4 Settings
Parameter
Connection Type
NetMask
Static IP
Gateway
Primary DNS
Secondary DNS
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
216
Description
Allows you to enter password for the user.
Default: Blank
Allows you to make the phone menus and options that the phone users
see as read-only fields.
Allows you to restrict the menus and options that phone users see when
they use the phone interface. Choose yes to enable this parameter and
restrict access.
Default: No
Specific parameters are then designated as "na" or "ro" using provisioning
files. Parameters designated as "na" will not appear on the phone
interface. Parameters designated as "ro" will not be editable by the user.
Description
Allows you to select the internet protocol mode in which the phone
operates. Options are: IPv4 Only, IPv6 Only, and Dual Mode. In dual
mode, the phone can have both IPv4 and IPv6 addresses.
Default: Dual Mode
Description
Internet connection type that is configured for the phone. Options are
DHCP and Static IP.
Default: DHCP
Subnet mask of the phone.
IP address of the phone.
IP address of the gateway.
Primary Domain Name Server (DNS) assigned to the phone.
Secondary Domain Name Server (DNS) if assigned to the phone.