Connect A Key Expansion Module To A Cisco Ip Phone; Cisco Ip Phone 8800 Series Multiplatform Phones Administration Guide - Cisco 8851 Administration Manual

Connect a Key Expansion Module to a Cisco IP Phone

Connect a Key Expansion Module to a Cisco IP Phone
If you want to install more than one expansion module, you repeat steps 7-9 to connect the other expansion
modules together.
Procedure
Step 1 Unplug the Ethernet cable from the phone.
Step 2
If installed, remove the footstand from the phone.
Step 3 Locate the accessory connector covers on the side of the phone.
This diagram shows the location.
Step 4 Remove the two accessory connector covers, as shown in the diagram.

Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide

92