Connect The Footstand - Cisco 8851 Administration Manual

Connect the Footstand

Accessory
Speakers: See External Speakers and
Microphone, on page 84.
Connect the Footstand
If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Procedure
Step 1 Insert the connectors into the slots.
Step 2 Press the footstand until the connectors snap into place.
Step 3
Adjust the angle of the phone.
Secure the Phone with a Cable Lock
You can secure your phone with a laptop cable lock up to 20 mm wide.
Procedure
Step 1 Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.
Step 2 Pass the lock through the looped end of the cable.
Step 3 Unlock the cable lock.
Step 4 Press and hold the locking button to align the locking teeth.
Step 5 Insert the cable lock into the lock slot of your phone and release the locking button.
Step 6 Lock the cable lock.
External Speakers and Microphone
External speakers and microphones are plug-and-play accessories. You can connect an external PC-type
microphone and powered speakers (with amplifier) on the Cisco IP Phone by using the line in/out jacks.
Connecting an external microphone disables the internal microphone and connecting an external speaker
disables the internal phone speaker.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
84
Type Cisco IP Phone
8811
External PC -
Cisco IP Phone Cisco IP Phone
8841 8851
- -
Cisco IP Phone
8861
X