Xml Services; Enable Access To Phone Web Interface - Cisco 8851 Administration Manual

Enable Access to Phone Web Interface

Procedure
Step 1
Click Admin Login > advanced > Voice > System.
Step 2 Under the System Configuration section, choose Yes from the Enable Web Server drop-down list box.
Step 3 In the Enable Protocol drop-down list box, choose Http or Https.
Step 4 In the Web Server Port field, enter the port to access the web server. The default is port 80 for HTTP or port
443 for HTTPS.
Step 5 In the Enable Web Admin Access drop-down list box, you can enable or disable local access to the Admin
Login of the phone web user interface. Defaults to Yes (enabled).
Step 6
In the Admin Password field, enter a password if you want the system administrator to log in to the phone
web user interface with a password. The password prompt appears when an administrator clicks Admin Login.
The minimum password length can be 4 characters or the maximum password length is 127 characters.
Note
Step 7 In the User Password field, enter a password if you want users to log in to the phone web user interface with
a password. The password prompt appears when users click User Login. The minimum password length can
be 4 characters or the maximum password length is 127 characters.
Note
Step 8 Click Submit All Changes.

XML Services

The phones provide support for XML services, such as an XML Directory Service or other XML applications.
For XML services, only HTTP and HTTPS support are available.
The following Cisco XML objects are supported:
• CiscoIPPhoneMenu
• CiscoIPPhoneText
• CiscoIPPhoneInput
• CiscoIPPhoneDirectory
• CiscoIPPhoneIconMenu
• CiscoIPPhoneStatus
• CiscoIPPhoneExecute
• CiscoIPPhoneImage
• CiscoIPPhoneImageFile
• CiscoIPPhoneGraphicMenu
• CiscoIPPhoneFileMenu
The password can contain any character except the Space
key.
The password can contain any character except the Space
key.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
XML Services
147