Cisco IP Phone Web Page
Procedure
Step 1
On the Phone Web page, select Admin Login > Info > Status.
Step 2
In the Product Information section, you can view the customization state of the phone in the Customization
field.
If any provisioning is failing, you can view the details in the Provisioning Status section on the same page.
Cisco IP Phone Web Page
This section describes the information that you can obtain from the phone web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
Related Topics
Access the Web-Based Configuration Utility, on page 76
Determine the IP Address of the Phone, on page 77
Allow Web Access to the Cisco IP Phone, on page 77
Info
The fields on this tab are read-only and cannot be edited.
Status
System Information
Parameter
Host Name
Domain
Primary NTP Server
Secondary NTP Server
Bluetooth Enabled
Bluetooth Connected
Bluetooth MAC
Connected Device ID
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
200
Description
Displays the current host name assigned to the phone.
Displays the network domain name of the phone.
Default: cisco.com
Displays the primary NTP server assigned to the phone.
Displays the secondary NTP server assigned to the phone.
Indicates if the phone has Bluetooth enabled to it.
Indicates if the phone has Bluetooth is connected to it.
Displays the MAC address of the Bluetooth device.
Displays the ID of the connected device.