Configure A Speed Dial With The Configuration Utility Page; Dtmf Wait And Pause Parameters - Cisco 8851 Administration Manual

Configure a Speed Dial with the Configuration Utility Page

• ext= 9999 is the phone that the line key calls. Replace 9999 with appropriate phone number.
• vid=n is the line index of the phone.
• nme= XXXX is the name displayed on the phone for the speed-dial line key. Replace XXXX with a
You can also configure XML service with line key. Enter a string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 5 Click Submit All Changes.
Configure a Speed Dial with the Configuration Utility Page
You can configure speed dials on the phone with the web interface.
Procedure
Step 1
On the Configuration Utility page, select Admin Login > Voice > User.
Step 2 In the Speed Dial section, enter a name and number that corresponds to the speed dial entry.
Step 3 Click Submit All Changes.

DTMF Wait and Pause Parameters

Speed dial, directory, extended function, and other strings configured in the phone can include wait (X) and
pause (,) characters. These characters that allow manual and automatic DTMF (Dual-Tone Multi-Frequency)
signal transmission.
You can add the wait and pause character with speed-dial, extended function, or directory strings in the format:
{Dial_String}[ ][,|X][DTMF_string][,|X][DTMF_string]
where:
• Dial_String —is the number that the user is trying to reach. For example, 8537777 or 14088537777.
• [ ](space)—is a dial termination character that defines or delimits the end of the dial string. The space
• , (comma)—is a 2-second pause that is inserted for each comma in the string.
• X (wait)—indicates that the phone is waits for user input and acknowledgement.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
162
ext= xxxx.yyyy is the phone that the line key calls. Replace xxxx.yyyy with alphanumeric characters.
You can use these characters for alphanumeric dialing: a-z, A-Z, 0-9, -, _, ., and +.
name.
is mandatory. If the phone encounters an X or a comma (,) before the space, the characters are treated
as part of dial string.
When the user manually enters the DTMF signal with the key pad, the user sees a message to acknowledge
that the transmission of the manual entry is complete. On confirmation, the phone sends any DTMF